High resistance, high voltage decade resistance box with SP1\n switch
\n
1,3,6 & 9 decades available
\n
Range 1 kΩ to 1 TΩ
\n
Max voltage 5kv
\n
Accuracy €0.1%
\n
Portable Case
\n
1m High voltage leads included
\n
Calibration Certificate included
\n
\n
\n
RH9A High Resistance / High Voltage Decade Boxes - Total Resistance 1 Terraohm - Resolution 1 kilohm - Max Voltage 5000 Vdc.
\n
Designed using the Cropico High Quality SP1 switch combined with specially selected resistors, this range of high ohm resistance decades is ideal for\n the calibration of insulation test sets with a voltage rating up to 5kV. Housed in a rugged plastic carrying case with up to 9 decades the RH series\n covers the range 1 kΩ to 1 TΩ and is equally at home in the laboratory, workshop or field application.
Wide range, compact 6 decade resistance box with double pole switching
\n
\n
Range 10Ω to 10MΩ
\n
6 Decades
\n
1% Accuracy
\n
\n
RM6 Resistance Decade / Total Resistance 11.1111 M Ohms, Resolution 10Ohms
\n
This small cost effective decade resistance box further enhances our comprehensive range, offering excellent value for money. This 6 decade model has\n a total resistance of 11.1111 Megohms with a resolution of 10ohms. The accuracy of ±1% is achieved using metal film resistors which have a power\n rating of 0.4 Watt.
\n
\n \n
\n
Range
\n
11.1111 Megohm in steps of 10ohm
\n
\n
\n
Maximum Continuous Working Voltage
\n
70Vdc / 33vrms
\n
\n
\n
Resistors
\n
Metal film 0.4W at 70°C\n Temperature Co-efficient: ±100 ppm. / °C
\n
\n
\n
Terminals
\n
Insulated will accept 4mm banana plugs and spade tags
The RM6-N is a space and cost-saving 6 decade resistance box . 3 models are available covering the range 1ohm to 111.111 Megohm. An additional 1kohm resistor\n is available at the terminals enabling the user to make a simple divider. The RM6-N incorporates 0.6 watt metal film resistors with a specified accuracy\n of ±1%.
\n
The RM6-Ns constitute an ideal tool for use in all electrical and electronic laboratories or workshop environment offering a wide range of values with\n minimum cost.
Compact 8 decade resistance box with double pole switching
\n
\n
Wide Range 0.01Ω to 1MΩ
\n
Accuracy 0.1%
\n
Power Rating 1W / Coil
\n
\n
RM8 Resistance Decade / Total Resistance 1.1111111Megohm, Resolution 0.01ohm.
\n
The model RM8 decade resistance box is designed to complement our range of resistance boxes, offering a very wide range 0.01ohm to 1Megohm in a compact\n and versatile unit. The low decade steps of 0.01ohm enables very high resolution, when simulating resistance values and the power rating is 1.0\n watt per coil.
\n
The RM8 uses double pole switching to minimize the effects of contact resistance. The lower value decades (0.01 and 0.1ohm) are manufactured from manganin\n resistance wire and the other decades from selected metal film resistors. This offers good stability combined with excellent load and temperature\n coefficients.
\n
\n \n
\n
Decade
\n
Accuracy
\n
Max. Current
\n
\n
\n
10 x 100kohm
\n
± 0.1%
\n
0.003A
\n
\n
\n
10 x 10kohm
\n
± 0.1%
\n
0.01A
\n
\n
\n
10 x 1kohm
\n
± 0.1%
\n
0.33A
\n
\n
\n
10 x 100ohm
\n
± 0.1%
\n
0.1A
\n
\n
\n
10 x 10ohm
\n
± 0.5%
\n
0.3A
\n
\n
\n
10 x 1ohm
\n
± 1%
\n
1.0A
\n
\n
\n
10 x 0.1ohm
\n
± 5%
\n
1.0A
\n
\n
\n
10 x 0.01ohm
\n
± 10%
\n
1.0A
\n
\n \n
\n \n
\n
Resistors
Rotary 2 pole in parallel, contacts silver plated brass with positive click mechanism. Insulation > 50,000 Megohm
Maximum Continuous Working Voltage
70Vdc / 33vrms
Switches
Insulated will accept 4 mm banana plugs and spade tags.
Residual Resistance
<0.1ohm
Terminals
2 binding posts will accept 4 mm banana plugs and spade tags. 1 terminal for connection to panel/earth
The RS3 range of resistance standards are constructed using carefully selected low temperature coefficient Manganin or Zeranin wire, depending on the\n value, mounted on formers which have a high mechanical stability. The wires are wound in a strain free manner and heat treated to remove any stresses.\n They are also artificially aged under the strictest control. The result is a standard of high quality with long term stability and permanence of\n calibration combined with a low temperature coefficient.
\n
We offer the widest range of standard values available today. In addition we are able to manufacture for special applications (e.g. Pt100 simulation)\n special values to customer requirements.
\n
The RS3 range also offers a high current carrying capability which makes them ideal for applications where precise current needs to be measured.
\n
4 terminal construction, high stability resistance standard with wide range\n \n
Advanced Multifunction Safety Testers for Production Lines
\n
\n
Fully configurable automatic test sequences
\n
Compatibility with label printer and barcode scanner
\n
Ideal for mid to high volume production line testing
\n
\n
The HAL comprehensive safety testers offer outstanding levels of flexibility and functionality to dramatically improve the quality and productivity\n of production line safety testing.
\n
With a range of different tests and functionality, the HAL series provides a solution for any production line testing requirement from low volume manual\n testing through to high volume automated test programmes. The large display and simple push-button operation makes the process of testing straightforward\n and fast, ensuring your production line continues to efficiently meet the demands of any number of quality and safety standards.
\n
A choice of automatic, manual or direct PC modes offers maximum flexibility for use and control of the HAL series.
\n
Automatic mode provides a structured, repeatable route to testing through storing complete test sequences in the internal memory of the instrument,\n making it ideal for the production line environment.
\n
For environments where flexibility of test parameters and diagnostic checks are required, a manual mode enables individual tests to be performed easily.\n
\n
For those wanting a fully automated approach, simple command protocols can be used in order for the HAL series tester to be controlled via a PC or\n other device.
\n
The HAL 104 can communicate with a PLC (programmable logic controller) to aid automated test processes, including remote start / stop and pass / fail\n outputs.
\n
International variants available.
\n
HAL 104
The flagship product in the HAL series, the HAL 104 is designed to dramatically improve the efficiency and productivity of production line testing\n and features:\n Advanced integration options\n \n
\n
Analogue inputs allow testing to be recorded on the HAL from external devices e.g. recording the speed of a motor whilst in operation
\n
Digital outputs enable control of external devices using relay control e.g. switching matrices
\n
Compatibility with PowerSmart and SwitchSmart for advanced automation
\n
Full complement of electrical safety tests\n
\n
Power/leakage measurement for operational, safety and quality checks.
\n
\n
\n
\n
HAL LED
The HAL LED has been designed with a reduced power measurement range with greater resolution than the HAL 104, making it ideal for the testing\n of low power electronics such as LED lighting.\n
HAL 103
The HAL 103 is a comprehensive tester capable of performing dielectric strength, earth/ground bond and DCIR tests.\n
HAL 102
The HAL 102 is a DCIR tester with 5 channel scanner, enabling up to 5 tests to be performed in sequence on either the same product or a group of\n products, without any need for human intervention.\n
HAL 101
The HAL 101 is a simple dielectric strength and DCIR tester, enabling one test point or product to be tested at any one time\n
The DO5002 micro-ohmmeter is a truly remarkable instrument and ideally suited for laboratory testing of samples, for production line testing, and with the addition of the interfaces RS232 / IEEE-488 or PLC, the DO5002 micro ohmmeter may be remotely controlled and integrated into an automated testing system.\n \n
\n
The DO5002 micro ohmmeter encompasses all the features required of an ohmmeter in one instrument. Programmable measuring current in 100 steps ensures\n that the DO5002 is suitable for all your applications. Automatic temperature compensation and Hi / Lo limits permits sorting of components with\n the minimum of fuss. Statistical analysis of these values allows you to display the max/min /average values as well as peak to peak and standard\n deviation. The DO5002 will even calculate cable lengths in ohms/metre.
\n
\n
\n
Programmable micro-ohmmeter
\n
Measures resistance from 200 milli-ohm to 30 kohm, with 100 nohm resolution\n
\n
Adjustable current ranges,10uA-100mA
\n
High accuracy of 0.03%,6 ranges, 200 milli-ohms to 30 kohms
\n
Fast sampling (0.02Hz) at 10u ohm resolution
\n
\n
\n
Technical specification
\n
Measurement
4 wire eliminates lead resistance
Display
LCD Graphics panel with backlight 30,000 count
Ranges
Manual / Automatic
Auto Zero
Value Average Hold
Systems Interface
RS232 fitted as standard, IEEE-488, PLC option
Terminals
4mm safety sockets
Working Temperature
0°C ... 45 °C
Storage Temperature
-10°C...+60°C
Mains Supply
230 V ±10%, 115 V ±10% 47...63Hz
Safety
IEC 1010 Class 1
Dimensions
339 x 324 x 131mm (W D H)
Weight
8.5kg
Accessories
Supplied with RS232 interface, mains cord, handbook and certificate of conformity
The DO7 digital micro-ohmmeter is a practical instrument for low resistance measurement, ideal for utilities use in the workshop, field or test facilities.\n It is of rugged construction, contained in a sealed ABS plastic case with lid and carrying handle.
\n
The DO7 digital micro-ohmmeter has many advanced features. Rechargeable batteries means real portability with more than 1 hour of continuous operation\n on the lowest ranges(10A), and 20 hours on all others. The internal charger will boost charge to 90% of full charge, switching automatically to\n a trickle maintenance charge. Warning LEDs illuminate when an open circuit lead condition is detected.
\n
\n
High accuracy from 600 micro-ohms to 60 ohms ranges
\n
LED display for daylight viewing
\n
Mains / rechargeable battery operation
\n
\n
Technical specification
Measurement
4 Terminal Kelvin/Thomson principle eliminates error due to lead resistance. Open circuit measurement voltage~2V dc
Display
0.8\" LED 6,000 count with automatic decimal point and polarity indication
Ranges
6 push button selected with LED indication
Calibration
Digital, security key protected
Protection
415 vrms maximum at input terminals
Battery
Sealed lead acid, rechargeable cells giving a minimum of 1 hour of continuous measurement on the lowest 10 amp ranges and 20 hours on all other ranges. Internal charger with battery state indicator
Terminals
6mm binding posts accept spade tags and 4mm banana plugs
Working Temp
0...40°C rel. humidity 80% max. non-condensing
Storage Temp
-20...+50°C
Mains Supply
100/120/220/240 Volts +10% -13% 47Þ63Hz 20VA
Safety
IEC 1010 Protective Class 1
EMC
Complies with EN61326
Dimensions
343 x 327 x 152mm (W D H) approx
Mass
8 kg approx
Accessories
Supplied complete with mains cord, measuring leads with Kelvin Clips, handbook and calibration certificate
The Sentinel series of test instruments has been built to provide a cost effective, yet powerful solution to hipot testing, whether on a production\n line or in a laboratory environment for compliance testing purposes. With the ability to perform either 5kV AC or 6kV DC dielectric strength\n tests and up to 500VA AC power output the Sentinel series can aid testing to many international safety standards including IEC, EN, UL and\n CSA to name but a few. With many features, the Sentinel series ensures testing is performed accurately, efficiently and safely.
\n
Key Features
\n
\n
500 VA capability (Sentinel 500 series)
\n
Earth bond / insulation resistance (Sentinel 501)
\n
Sweep function for test analysis
\n
Flexible / high resolution test parameters
\n
Manual / automatic test modes
\n
Remote and PLC control
\n
Fast cut off and automatic discharge
\n
\n
Key Users
\n
\n
R&D Departments
\n
Compliance Laboratories
\n
Design Engineers
\n
QA Departments
\n
Production and Manufacturing Engineers
\n
\n
\n
Sweep function (Sentinel 500 / 501)
\n
When used in manual mode the sweep function plots measured values, current or resistance against the test time, represented as a trace graph. This\n allows the user to view changes in the measured parameter throughout the entire test process instead of one final value at the end of a test,\n perfect for research and development laboratories who want to assess the electrical safety properties of equipment over a period of time.
\n
Flexible parameters and high resolution performance
\n
With adjustable ramp and hold times (0.1 - 999.9s) the test time can be set to appropriately rise to the correct output voltage in order to comply\n with international test standards and to reduce the risk of damaging the equipment under test. Highly accurate measurement characteristics\n such as a 2V resolution on output voltage allow for precise measurement output, and 1μA ±(1.5% +30μA) resolution for the trip current ensures\n that the smallest of leakage currents can be accurately measured.
\n
Automatic testing and remote control
\n
Up to 100 test conditions can be saved and recalled for single test purposes, or for those that require sequential testing, manual test settings\n can be linked together to create up to 100 automatic test sequences, ensuring simple recall for repeat testing. For those looking for automation\n in the test area, the Sentinel series has many tools to aid this. A remote start terminal and signal I/O port allow for remote starting, safety\n interlocking and PLC Control. In addition, the Sentinel series is fitted with RS-232, USB and GPIB (option) to allow PC control of the test\n instrument and retrieval of test results.
\n
Enhanced safety features
\n
Designed with safety in mind, the Sentinel series will automatically cut out the output voltage within 150μs where abnormal output voltages are\n detected or when the upper or lower current trip limits are reached whilst under test. Furthermore, to protect the user from any potential\n hazard due to stored charge, the Sentinel will automatically discharge the item under test within 200ms on completion of the performed test.\n High intensity LEDs will alert the user when voltage is present on the test outputs.
The KD1E is a neon HV potential indicator suitable for use on earthed neutral systems up to 11kV. A highly robust, portable AC/DC voltage indicator,\n this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits.
\n
Conforming in design lengths to recommended creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally\n encapsulated resistor chains. For additional safety a proving unit (PH3) is available and should be used before and after the high voltage indicator\n is employed.
The KD1E/19 is a neon HV potential indicator suitable for use on earthed neutral systems up to 19kV. A highly robust portable AC/DC voltage indicator,\n this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits.
\n
Conforming in design lengths to recommended creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains. For additional safety a proving unit (PH3) is available and should be used before and after the high voltage indicator is employed.
The KD1E/22 is a neon HV potential indicator suitable for use on earthed neutral systems up to 22kV. A highly robust, portable AC/DC voltage indicator,\n this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits.\n \n
\n
Conforming in design lengths to recommended creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains. For additional safety a proving unit (PH3) is available and should be used before and after the high voltage indicator is employed.
The KD1E/33 is a neon HV potential indicator suitable for use on earthed neutral systems up to 33kV. A range of highly portable, neon and digital potential\n indicators, these instruments provide a means of confirming the presence of voltage on earthed neutral electrical circuits.
\n
Conforming in design lengths to recommended creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains. For additional safety a proving unit (PH3) is available and should be used before and after the high voltage indicator is employed.
The KD1E/19S is a neon AC only HV potential indicator suitable for use on earthed neutral systems up to 19kV. A highly robust, portable AC only voltage\n indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits.\n \n
\n
Conforming in design lengths to recommended, creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains.
\n
Note: The KD1E/19S is an AC Only indicator and is not compatible with the PH3 proving unit which has a DC output.
The KD1E/KAD is a neon HV potential indicator with audio alarm, suitable for use on earthed neutral systems up to 11kV. A highly robust, portable AC/DC\n voltage indicator, this potential indicator provides a means of confirming the presence of voltage on earthed neutral electrical circuits.\n \n
\n
Conforming in design lengths to recommended, creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains. For additional safety a proving unit (PH3) is available and should be used before and after the high voltage indicator is employed.
The KD1E/15D is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral\n systems up to 15kV. The potential indicator display is powered by an integral rechargeable battery and is supplied complete with battery charger and\n PH3 proving unit in a bespoke carrying case.
\n
This robust, highly portable digital potential indicator is supplied with a carrying case for the indicator and accessories. These instruments provide\n a means of measuring voltage on earthed neutral electrical circuits.
\n
Conforming in design lengths to recommended, creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains.
The KD1E/33D is a digital HV potential indicator which can be used to indicate the presence of voltage or make voltage measurements on earthed neutral\n systems up to 33kV.\n \n
\n
The potential indicator display is powered by an integral rechargeable battery and is supplied complete with battery charger and PH3 proving unit in a\n bespoke carrying case. This robust, highly portable digital potential indicator is supplied with a carrying case for the indicator and accessories.\n These instruments provide a means of measuring voltage on earthed neutral electrical circuits.
\n
Conforming in design lengths to recommended, creepage and safety standards, the KDIE series features high grade PVC tubing and incorporates totally encapsulated\n resistor chains. Supplied without Calibration Certificate when purchased online.
A highly portable, battery powered proving unit for proving high voltage indicators, live line testers and digital potential indicators. This proving\n unit produces a DC output voltage for confirming the operation of voltage indicators before and after use.
\n
Designed for use with potential indicators and phasing rods with domed contact electrodes.
A highly portable, battery powered proving unit for proving high voltage indicators, live line testers and digital potential indicators. This proving\n unit produces a DC output voltage for confirming the operation of voltage indicators before and after use.
\n
Designed for use with the KD1E/19 and other instruments with flat contact electrodes.
The Seaward LLT live line tester is a voltage detector ideal for live line testing on systems up to 1100V DC, and is encapsulated in a high impact\n rugged enclosure with high-visibility cable. The unit is fitted with high-intensity red LED indicators and a polarizing filter making it clearly\n visible, even in direct sunlight.
\n
Designed specifically for live line applications, the LLT high voltage indicator ensures conductor rails have been isolated from the power supply before\n maintenance or inspection work commences on rail track systems.
The PR11 phasing sticks provide a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers\n or secondary wiring circuits. A neon type instrument, it is designed for use on earthed neutral circuits up to 11kV.
The PR15D is a digital HV potential indicator and phasing stick which can be used to indicate the presence of voltage, make voltage measurements and\n provide a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring\n circuits. It is suitable for use on earthed neutral systems up to 15kV.
\n
The LCD display is powered by an integral rechargeable battery and is supplied complete with battery charger and PH3 proving unit in a bespoke carrying\n case. Conforming to recommended, creepage and safety standards, the PR15D features high-grade PVC tubing and incorporates totally encapsulated\n resistor chains.
The PR33D is a digital HV potential indicator and phasing stick which can be used to indicate the presence of voltage, make voltage measurements and\n provide a means of phase comparison at the point of paralleling two circuits, without the interposition of voltage transformers or secondary wiring\n circuits. It is suitable for use on earthed neutral systems up to 33kV.
\n
The LCD display is powered by an integral rechargeable battery and is supplied complete with battery charger and PH3 proving unit in a bespoke carrying\n case. Conforming to recommended, creepage and safety standards, the PR33D features high-grade PVC tubing and incorporates totally encapsulated\n resistor chains.
This portable digital milli-ohmmeter is a practical instrument for low resistance measurement, ideal for use in multiple industries workshop, field\n or test labs.
\n
This milli-ohmmeter is of rugged construction contained in a sturdy plastic case. The Series 4000 has many advanced features, including auto ranging,\n forward and reverse current measurement with auto average, true current zero, protection up to 415 volts rms, digital calibration and long scale\n length, 4000 count and auto power down to maximise battery life.
\n
The Series 4000 milli-ohmmeters are supplied ready for immediate use with batteries and measuring leads, no extras are normally necessary.
\n
\n
\n
Fast response hand held True 4-terminal measurement ohmmeter
The model 4001 includes temperature compensation, with preset coefficients for copper and aluminium plus user settable coefficients for other materials.\n Temperature measurement over the range -50...+800 deg. C is also available.
\n
This portable digital milli-ohmmeter is a practical instrument for low resistance measurement, ideal for use in the workshop, field or test facilities.\n This milli-ohmmeter is of rugged construction contained in a sturdy plastic case.
\n
The Series 4000 has many advanced features, including Auto ranging, forward and reverse current measurement with auto average, True current zero, protection\n up to 415 volts rms, digital calibration and long scale length, 4,000 count and auto power down to maximise battery life.
\n
\n
\n
Fast response hand held True 4-terminal measurement ohmmeter eliminates lead resistance errors \n
\n
Wide resistance measuring range from 4 milli-ohm to 4 kilo-ohm
The DO4002 digital micro-ohmmeter offers true portability without any sacrifice to accuracy or functionality. This micro-ohmmeter is a ruggedly constructed\n instrument is housed in a stylish plastic case with easy to use keyboard. The measured values are displayed on a large LCD screen which allows\n for ease of viewing. Automatic or manual range selection is available and many advanced features are included.
\n
\n
\n
Fast response hand held True 4 terminal measurement eliminates\n lead resistance errors
\n
Automatic or manual resistance range selection between 6 ranges
\n
Wide Resistance measuring range from 4 milli ohm to 400 ohm
This portable digital ohmmeter is a practical instrument for low resistance measurement, ideal for use in the workshop, field or test facilities. It\n is of rugged construction contained in an aluminium case with tilt handle.
\n
The DO4A has many advanced features, including protection up to 415 volts rms, digital calibration and long scale length, 4,000 count. The rechargeable\n sealed lead acid battery means real portability with more than 14 hours continuous operation, without the problems normally associated with other\n battery types. Full measurement capability is maintained whilst charging.
\n
\n
\n
Digital bench Millio-ohmmeter with True 4 wire measurement eliminates lead resistance errors
\n
6 Push button ranges from 40 milli-ohms to 4kilo-ohm with\n long scale length \n \n
\n
10μΩ resolution on 40m Ω range
\n
Rechargeable battery with 14 hours continuous operation
\n
Input protection up to 415 volts rms
\n
Zero control thermal E.M.F. compensation
\n
Digital calibration
\n
Mains/rechargeable battery operation
\n
Open circuit lead warning
\n
Rugged construction with aluminium case
\n
\n
\n
Technical specification
\n
\n \n
\n
Measurement
\n
4 Terminal Kelvin/Thomson principle eliminates error due to lead resistance. Open circuit measurement voltage approx. 5V dc.
\n
\n
\n
Display
\n
15mm LCD 4,000 count with automatic decimal point and polarity indication.
\n
\n
\n
Ranges
\n
6 Push button selected with LED indication
\n
\n
\n
Auto Zero
\n
Permits the automatic zero of amplifiers and external circuits eliminating errors due to thermal emf.
\n
\n
\n
Calibration
\n
Digital, security key protected
\n
\n
\n
Protection
\n
415 rms maximum at input terminals
\n
\n
\n
Battery
\n
6 Volt 2.8 Ah sealed lead acid, replaceable. Operating Time: 14 hours typical on bottom range, 28 hours typical on other ranges. Internal\n charger with automatic switch-off to prevent deep discharge.
\n
\n
\n
Executive Lead Pack
\n
This lead pack consists of four test leads, 1 metre long, with 4mm banana plugs, 4 crocodile clips, 4 test prods and 2 Kelvin Clips (combined\n current and potential clips).
\n
\n
\n
Terminals
\n
4mm binding posts accept spade tags and 4mm banana plugs
The DO5000 micro-ohmmeter is a truly remarkable instrument and ideally suited for laboratory testing of samples, for production line testing, and with\n the addition of the interfaces RS232 / IEEE-488 or PLC, the DO5000 may be remotely controlled. Automatic temperature compensation and Hi / Lo limit\n permits sorting of components with the minimum of fuss. All these options are included in the basic unit as well as a data logging function which\n stores up to 4000 readings with date and time stamp. Statistical analysis of these values allows you to display the max / min /average values as\n well as peak to peak and standard deviation. The DO5000 will even calculate cable lengths in ohms/metre.
\n
\n
\n
Programmable micro-ohmmeter
\n
Measures resistance from 3 mohms to 30 kohms, with 100 nohm resolution
\n
Current range from 10 uA to 10 A
\n
High accuracy of 0.03% and fast measuring of 50 measurements per second
\n
Data logging of up to 4000 measurements, with statistical analysis of these values
\n
\n
\n
Technical specification
Measurement
4 wire eliminates lead resistance
Display
LCD Graphics panel with backlight 30,000 count
Ranges
Manual / Automatic
Auto Zero
Value Average Hold
Systems Interface
RS232 fitted as standard, IEEE-488, PLC option
Terminals
4mm safety sockets
Working Temperature
0°C ... 45°C
Storage Temperature
-10°C...+60°C
Mains Supply
230V ±10%, 115V ±10% 47...63Hz
Safety
IEC 1010 Class 1
Dimensions
339 x 324 x 131mm (W D H)
Weight
8.5kg
Accessories
Supplied with RS232 interface, mains cord, handbook and certificate of conformity
The DO5001 micro-ohmmeter encompasses all the features required of an ohmmeter in one instrument. Automatic temperature compensation and Hi / Lo limits\n permits sorting of components with the minimum of fuss. All these options are included in the basic unit as well as a data logging function which\n stores up to 4,000 readings with date and time stamp.
\n
Statistical analysis of these values allows you to display the max/min/average values as well as peak to peak. The DO5001 micro ohmmeter is a truly\n remarkable instrument and ideally suited for laboratory testing of samples, for production line testing, fast measurement mode which measures at\n 50 measurements per second.
\n
For applications where portability is required the model 5001 may be powered either from the mains or by the inbuilt rechargeable batteries.
\n
\n
\n
Programmable micro-ohmmeter
\n
Measures resistance from 3 mohm to 30 kohm, with 100 nohm resolution
\n
Current range from 10uA to 10A
\n
High accuracy of 0.03% and fast measuring of 50 measurements per second
\n
Data logging of up to 4000 measurements, with statistical analysis of these values
\n
Mains/battery operation
\n
Rechargeable battery
\n
\n
\n
Technical specification
Measurement
4 wire eliminates lead resistance
Display
LCD Graphics panel with backlight 30,000 count
Ranges
Manual / Automatic
Auto Zero
Value Average Hold
Systems Interface
RS232 fitted as standard, IEEE-488, PLC option
Terminals
4mm safety sockets
Working Temperature
0°C ... 45°C
Storage Temperature
-10°C...+60°C
Mains Supply
230 V ±10%, 115 V ±10% 47...63Hz
Safety
IEC 1010 Class 1
Dimensions
339 x 324 x 131mm (W D H)
Weight
8.5kg
Accessories
Supplied with RS232 interface, mains cord, handbook and certificate of conformity
The Milliohmmeter Test Standards are designed for the simple and easy calibration of low resistance ohmmeters and Kelvin / Thomson bridges. The true\n four terminal resistance values are switch selected and provision is made for + and - full scale values. A four terminal zero value may also be\n selected, thus making zero and full scale calibration of instruments simplicity itself.
\n
Two models are available, the MTS1A which has 11 values from 1 mohm to 100 Kohm and the MTS2 which has 10 values from 400 micro-ohm to 400 Kohm.
The Milliohmmeter Test Standards are designed for the simple and easy calibration of low resistance ohmmeters and Kelvin / Thomson bridges. The true\n four terminal resistance values are switch selected and provision is made for + and - full scale values. A four terminal zero value may also be\n selected, thus making zero and full scale calibration of instruments simplicity itself.
\n
Two models are available, the MTS1A which has 11 values from 1 mohm to 100 Kohm and the MTS2 which has 10 values from 400 micro-ohm to 400 Kohm.
![\"arrow\"](\"http://www.seaward.co.uk/Images/arrow.gif\"){kind=icon}
HAL LED![](\"/halCapture.JPG\")
\n ![](\"/HAL1Capture.JPG\")
![](\"/HAL2Capture.JPG\")
![](\"/HAL3Capture.JPG\")
\n 
![](\"/sentCapture.JPG\")
![](\"/sentaCapture.JPG\")
\n ![](\"/sent1Capture.JPG\")
![](\"/sent2Capture.JPG\")
![](\"/sent3Capture.JPG\")
![](\"/sentbCapture.JPG\")
\n 
.jpg?Action=thumbnail&Width=220&Height=220&Algorithm=proportional&USM=1)
![](\"/DO4000Capture.JPG\")
![](\"/DO4000specCapture.JPG\")
\n 
