Test your Voltage indicator is working before you prove equipment is safe to touch.
\n
\n
Many workplace regulations require you to conclusively test that your tester is working correctly BEFORE and AFTER
\n
proving that equipment is de-energised and safe to work on.
\n
\n
A convenient 240V power outlet is not always readily available in the field to test your instrument.
\n
\n
Testing on low voltage or DC such as a vehicle battery does not conclusively prove your tester is functional on AC mains.
\n
Most instruments auto select the highest range >200V AC. Proving your tester is working on the range you will use to prove safe, will maximise\n your Duty of Care.
\n
\n
\n
Proves a voltmeter is functioning correctly at a nominal 230V AC
\n
Required under WHS before proving a circuit is safe to touch
\n
Tests meter, leads and fuses at mains voltage\n
\n
Tests all multimeters & voltage testers with an input impedance > 0.5MΩ
\n
Internally self-checks that mains voltage is applied at terminals\n
\n
Indicates low battery to prevent false indication\n
CAT IV 1000 V IP65 Type S Voltage Absence Tester (VAT)\n
\n
An essential tool for electricians to check that no voltage is present before working on any electrical installation connected to the network.
\n
Compliant with IEC 61243-3 Edition 2, the C.A 771 VAT can be used to work on any 1,000 V CAT IV installation. It is rated IP65 and offers a type-S extended climatic class for indoor and outdoor use, including in extreme conditions.
\n
To meet the requirements of the standards in certain countries, this tester is available in two versions: equipped with IP2X test probes or without.\n The C.A 771 has a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50\n VAC / 120 VDC.
\n
Safety is ensured when testing Residual Current Device (RCD) tripping by means of a double control system; both hands are necessary to press the 2\n buttons simultaneously.
\n
The C.A 771's integrated Autotest checks the electrical circuits, the power supply, the displays and the condition of the measurement leads.
\n
Phase rotation measurement is practical, simple and quick with the 2-wire microprocessor system.
\n
Audible and visual continuity testing is provided in compliance with Appendix B of the standard. The tester can also detect stray voltages and offers\n unipolar phase identification.
\n
The test probe and leads can be removed. The C.A 753 measurement accessory (optional) can be used for quick, easy testing of European and Schuko 2P+E\n power sockets.
\n
Specifications:\n
\n
\n
CAT IV 1,000 V
\n
IP65
\n
Full autotest
\n
Voltage detection, LED display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
\n
Frequency: DC, 162/3 to 800 Hz
\n
Detection of stray voltages
\n
Unipolar phase detection (a single contact)
\n
Two-pole phase-sequence testing with 2-wire method = a third hand is not required
\n
Continuity test with audible and visual indication (R < 100 Ω)
\n
Extended continuity test with visual indication for R < 2 kΩ , 60 kΩ and 300 kΩ
\n
RCD trip test
\n
Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
\n
Climatic conditions:-30 °C to +60 °C (Class S)
\n
Battery life > 5,000 x 10 s measurements
\n
Removable lead and test probe
\n
Delivered complete and ready to use
\n
Includes set of removable test probes 2mm with crystal safety cover, probe tip protection, velcro strap, batteries, user manual
CAT IV 1000 V IP65 two-pole Voltage Absence Tester (VAT)\n
\n
The C.A 773 VAT is an essential tool for electricians to check that no voltage is present before working on any electrical installation\n connected to the network.
\n
Compliant with IEC 61243-3 Edition 2, it can be used to work on any 1,000 V CAT IV, indoors or outdoors.
\n
To meet the requirements of the standards in certain countries, this tester is available in two versions: equipped with IP2X accessories or without.
\n
The C.A 773 has a backlit digital display in addition to the LEDs for viewing the measurement results.
\n
It is fitted with a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50 VAC / 120 VDC.
\n
The C.A 773's comprehensive Autotest checks the electrical circuits, the power supply, the displays and the condition of the measurement leads.
\n
Phase rotation measurement is practical, simple and quick with the 2-wire microprocessor system.
\n
Safety is ensured when testing Residual Current Device (RCD) tripping by means of a double control system; both hands are necessary to press the 2\n buttons simultaneously.
\n
Audible and visual continuity testing is provided in compliance with Appendix B of the standard. The tester can also detect stray voltages and offers\n unipolar phase identification.
\n
The test probe and leads can be removed. The C.A 753 measurement accessory (optional) can be used for quick, easy testing of European and Schuko 2P+E\n power sockets.
\n
Specifications:\n
\n
\n
CAT IV 1,000 V
\n
IP65
\n
Full autotest
\n
Voltage detection, LED display + backlit digital display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
\n
Frequency: DC, 162/3 to 800 Hz
\n
Stray voltage detection
\n
Unipolar phase detection (a single contact)
\n
Two-pole phase-sequence testing with 2-wire method = a third hand is not required
\n
Continuity test with audible and visual indication (R < 100 Ω)
\n
Extended continuity test with visual indication for R < 0.5 Ω to 2.999 kΩ
\n
RCD trip test
\n
Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
\n
Climatic conditions: -15 °C to +45 °C (Class N)
\n
Battery life > 2,500 x 10 s measurements
\n
Removable lead and test probe
\n
Delivered complete and ready to use
\n
Includes set of removable test probes 2mm with crystal safety cover, probe tip protection, velcro strap, batteries, user manual
Test your Voltage indicator is working before you prove equipment is safe to touch.
\n
\n
Many workplace regulations require you to conclusively test that your tester is working correctly BEFORE and AFTER
\n
proving that equipment is de-energised and safe to work on.
\n
\n
A convenient 240V power outlet is not always readily available in the field to test your instrument.
\n
\n
Testing on low voltage or DC such as a vehicle battery does not conclusively prove your tester is functional on AC mains.
\n
Most instruments auto select the highest range >200V AC. Proving your tester is working on the range you will use to prove safe, will maximise\n your Duty of Care.
\n
\n
\n
Proves a voltmeter is functioning correctly at a nominal 230V AC
\n
Required under WHS before proving a circuit is safe to touch
\n
Tests meter, leads and fuses at mains voltage\n
\n
Tests all multimeters & voltage testers with an input impedance > 0.5MΩ
\n
Internally self-checks that mains voltage is applied at terminals\n
\n
Indicates low battery to prevent false indication\n
CAT IV 1000 V IP65 Type S Voltage Absence Tester (VAT)\n
\n
An essential tool for electricians to check that no voltage is present before working on any electrical installation connected to the network.
\n
Compliant with IEC 61243-3 Edition 2, the C.A 771 VAT can be used to work on any 1,000 V CAT IV installation. It is rated IP65 and offers a type-S extended climatic class for indoor and outdoor use, including in extreme conditions.
\n
To meet the requirements of the standards in certain countries, this tester is available in two versions: equipped with IP2X test probes or without.\n The C.A 771 has a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50\n VAC / 120 VDC.
\n
Safety is ensured when testing Residual Current Device (RCD) tripping by means of a double control system; both hands are necessary to press the 2\n buttons simultaneously.
\n
The C.A 771's integrated Autotest checks the electrical circuits, the power supply, the displays and the condition of the measurement leads.
\n
Phase rotation measurement is practical, simple and quick with the 2-wire microprocessor system.
\n
Audible and visual continuity testing is provided in compliance with Appendix B of the standard. The tester can also detect stray voltages and offers\n unipolar phase identification.
\n
The test probe and leads can be removed. The C.A 753 measurement accessory (optional) can be used for quick, easy testing of European and Schuko 2P+E\n power sockets.
\n
Specifications:\n
\n
\n
CAT IV 1,000 V
\n
IP65
\n
Full autotest
\n
Voltage detection, LED display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
\n
Frequency: DC, 162/3 to 800 Hz
\n
Detection of stray voltages
\n
Unipolar phase detection (a single contact)
\n
Two-pole phase-sequence testing with 2-wire method = a third hand is not required
\n
Continuity test with audible and visual indication (R < 100 Ω)
\n
Extended continuity test with visual indication for R < 2 kΩ , 60 kΩ and 300 kΩ
\n
RCD trip test
\n
Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
\n
Climatic conditions:-30 °C to +60 °C (Class S)
\n
Battery life > 5,000 x 10 s measurements
\n
Removable lead and test probe
\n
Delivered complete and ready to use
\n
Includes set of removable test probes 2mm with crystal safety cover, probe tip protection, velcro strap, batteries, user manual
CAT IV 1000 V IP65 two-pole Voltage Absence Tester (VAT)\n
\n
The C.A 773 VAT is an essential tool for electricians to check that no voltage is present before working on any electrical installation\n connected to the network.
\n
Compliant with IEC 61243-3 Edition 2, it can be used to work on any 1,000 V CAT IV, indoors or outdoors.
\n
To meet the requirements of the standards in certain countries, this tester is available in two versions: equipped with IP2X accessories or without.
\n
The C.A 773 has a backlit digital display in addition to the LEDs for viewing the measurement results.
\n
It is fitted with a redundant safety system in the event of power supply faults; the ELV LED flashes when the voltage exceeds 50 VAC / 120 VDC.
\n
The C.A 773's comprehensive Autotest checks the electrical circuits, the power supply, the displays and the condition of the measurement leads.
\n
Phase rotation measurement is practical, simple and quick with the 2-wire microprocessor system.
\n
Safety is ensured when testing Residual Current Device (RCD) tripping by means of a double control system; both hands are necessary to press the 2\n buttons simultaneously.
\n
Audible and visual continuity testing is provided in compliance with Appendix B of the standard. The tester can also detect stray voltages and offers\n unipolar phase identification.
\n
The test probe and leads can be removed. The C.A 753 measurement accessory (optional) can be used for quick, easy testing of European and Schuko 2P+E\n power sockets.
\n
Specifications:\n
\n
\n
CAT IV 1,000 V
\n
IP65
\n
Full autotest
\n
Voltage detection, LED display + backlit digital display: 12 VAC ≤ U ≤ 1,000 VAC • 12 VDC ≤ U ≤ 1,400 VDC
\n
Frequency: DC, 162/3 to 800 Hz
\n
Stray voltage detection
\n
Unipolar phase detection (a single contact)
\n
Two-pole phase-sequence testing with 2-wire method = a third hand is not required
\n
Continuity test with audible and visual indication (R < 100 Ω)
\n
Extended continuity test with visual indication for R < 0.5 Ω to 2.999 kΩ
\n
RCD trip test
\n
Complies with EN 61243-3 Ed.2009, EN 61243-3 Ed.2010 & IEC 61010 1000 V CAT IV
\n
Climatic conditions: -15 °C to +45 °C (Class N)
\n
Battery life > 2,500 x 10 s measurements
\n
Removable lead and test probe
\n
Delivered complete and ready to use
\n
Includes set of removable test probes 2mm with crystal safety cover, probe tip protection, velcro strap, batteries, user manual
![](\"/VTCapture.JPG\")
![](\"/p2Capture.JPG\")
![](\"/p3Capture.JPG\")
\n 
