• Dranetz HDPQ® Xplorer 400 Portable and

    Dranetz HDPQ® Xplorer 400 SP (Rated IP65) Power Quality Analyzers

    Designed for Commercial, Military, Aviation, and Naval Industries with 400Hz Monitoring Capability! 

    Power from the Phase Feature; Power the Instrument from the Circuit Being Measured, or Another Source (SP Only)

    Tests 50/60 and 400Hz

    High Speed Transient Capture

    Powered by the Phase Being Measured!
    (SP Only)

    Advanced Remote Wireless Communications

    Made in the USA

     

    The Dranetz HDPQ Xplorer 400 (portable) and Dranetz HDPQ Xplorer 400 SP (IP65) power quality analyzers take PQ, Demand and Energy monitoring to new heights by adding 400Hz monitoring capabilities to the already powerful Dranetz HDPQ Xplorer family. The Dranetz HDPQ Xplorer 400 is designed for applications such as aviation, naval, military, etc. requiring 400Hz capabilities that are not available in most PQ and Energy analyzers which typically only measure 50/60Hz. The Dranetz HDPQ Xplorer 400 family was designed with 400Hz applications in mind, but it is also an all-purpose tool that can be used for any traditional 50/60Hz application. In addition to the 400Hz applications, the Dranetz HDPQ Xplorer 400 family is perfect for applications such as power quality surveys, voltage and current transient studies, fault recording, inrush, motor testing, harmonic analysis, advanced distortion analysis, demand/energy/load studies, and many more.

    The Dranetz HDPQ Xplorer 400 and Dranetz HDPQ Xplorer 400 SP are the exact same instrument, but are in different enclosures. The Dranetz HDPQ Xplorer 400 is a true hand-held portable instrument with a built in 7″, tablet-like touch LCD display. The Dranetz HDPQ Xplorer 400 SP has the same measurement and communications capabilities, but is housed in an IP65 enclosure without an LCD display, and can also be powered by the circuit being measured. The IP65 enclosure of the Dranetz HDPQ Xplorer 400 SP greatly expands the applications of the Dranetz HDPQ Xplorer 400 into outdoor and harsh environments, along with other applications where an LCD display is undesirable.

    The Dranetz HDPQ Xplorer 400 family of power quality instruments offers you the best in class monitoring capabilities available. In addition to the 400Hz capabilities, it measures to all current industry standards, including IEC 61000-4-30 Class A, IEC 61000-4-7, IEEE 1159, IEEE 519, IEEE 1459, and more. With its high speed transient data capture (1 microsecond/channel) capabilities, this 8-channel workhorse simultaneously captures and characterizes thousands of parameters, by using a range of standard and customizable operating modes. The unique measurement capabilities include capture of low-medium-high frequency transients through peak, waveshape, rms duration and adaptive high-speed sampling, as well as power measurements to clearly characterize harmonics, non-sinusoidal, and unbalanced systems. The Intelligent AnswerModule® feature provides consultant-like analysis of sag directivity, capacitor switching transient identification/directivity and motor analysis/reporting.

    The Dranetz HDPQ Xplorer 400 family enables users to review data and change settings remotely from virtually any smartphone, tablet, mobile device, as well as with traditional PC and MAC laptops and desktops. Just hook up the instrument, close the cabinets to the ‘safe’ environment, and use either the VNC interface along with our Dran-View 7 software or our Dranetz HDPQ Apple or Android Apps via Ethernet for remote control from anywhere with connectivity to the instrument.

    Dranetz HDPQ Xplorer 400 Family – Precision

    • High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle
    • High Speed Digitized Transients to 1us – 10 to 2000Vpk
    • 50/60Hz and 400Hz operating modes
    • Eight channels, 4 voltage & 4 current
    • AnswerModules – Sag directivity, PF capacitor identification, motor – automatic event categorization
    • Advanced PQ – IEC 61000-4-30 Class A & IEEE 1159 compliant
    • Harmonics – IEC 61000-4-7, IEEE 519 (2014)
    • Transient capabilities – V & I – waveshape triggers, high speed. Well beyond standards requirements
    • IEEE 1459 Advanced Power Measurements
    • 10,000 cycle pre/post trigger buffer
    • EN 50160 Ed 3

    Dranetz HDPQ Xplorer 400 Family – Communications

    • Ethernet, Wi-Fi, USB, Bluetooth
    • VNC for full remote control from Dran-View 7 or a 3rd party App
    • Apple & Android apps with real time metering and alarm Dashboard

    Dranetz HDPQ Xplorer 400 Family – Safe & Rugged

    • Arc Flash Safety
    • UL/cUL listed and CE approved
    • Rugged enclosure with an easy to grip, shock absorbing, non-conductive boot (Dranetz HDPQ Xplorer 400 only)
    • IP65 enclosure for harsh and outdoor environments (Dranetz HDPQ Xplorer 400 SP only)
    • Drop tested to 6’ (Dranetz HDPQ Xplorer 400 only)
    • Power supply cable retainer (Dranetz HDPQ Xplorer 400 only)
    • Wire management in easel and hook (Dranetz HDPQ Xplorer 400 only)
    • Automatic circuit detection and feedback on proper connection of the instrument User Interface

    Dranetz HDPQ Xplorer 400 Family – User Interface

    • 7” WVGA color touch display (Dranetz HDPQ Xplorer 400 only)
    • Automatic setups – PQ, Demand and Energy
    • Tablet-like GUI that is icon driven, has taskbar shortcuts, and a Dashboard (only available remotely on the Dranetz HDPQ Xplorer 400 SP)

    Dranetz HDPQ Xplorer 400 Family – Productivity

    • Mini-report – Screen snapshots, XML file. Easily uploaded and emailed!
    • PQ & energy Dashboard’s for real time alarming
    • Bigger display for more productive local analysis (Dranetz HDPQ Xplorer 400 only)
    • AnswerModules – automatic event categorization
    Dran-View 7 power quality analysis software
    • Rescue kit – Part of Dran-View 7. Correct problems with wiring, CT orientation, time errors and more
    • Post processing – Part of Dran-View 7. Compute harmonics and other parameters from the waveforms recorded by the instrument

     

    Measured Parameters

    (4) Differential Voltage: 512 s/c, 16 bit resolution

    • 0-1000Vrms, AC/DC, +/- 0.1% reading +/- 0.05% FS
    • IEC 61000-4-30 Class A: 60-1000Vrms, ±0.1 % of Udin, range of 10% – 150% of Udin
    • Transients – rms: 0-1414Vpk, ±0.2 % of Udin
    • Transients – High Speed: 10-2000Vpk, +/- 10% of reading, +/- 0.5% FS

    (4) Current: 512 s/c, 16 bit resolution

    • Range (rms) probe dependent, AC/DC, +/- 0.1% reading +/- 0.05% FS
    • Transients – Range probe dependent
    • Transients – High Speed: Range probe dependent., 10% of Reading, +/- 0.5% FS

    Frequency: 10 sec window

    • 42.5-69Hz, +/- 0.01Hz, 380-420Hz +/- 0.1Hz

    Calculated Parameters

    Power/Energy – 1 Second sampling
    Real Power (W) – P: meets 0.2S requirements, range probe dependent
    Apparent Power (VA) – S: meets 0.2S requirements, range probe dependent
    Reactive Power (var) – Q: meets 0.2S requirements, range probe dependent
    Power Factor (W/VA) -”true” -1 to 0 to +1
    Displacement PF 1 to 0 to 1
    Demand (in W): meets 0.2S requirements, range probe dependent
    Energy (in Wh): meets 0.2S requirements, range probe dependent

    Distortion – 200ms, 3 sec, 10 min windows
    Vthd: 0-100%, +/- 5% for V>=1% Vnom,
    V Ind Harm: DC, 2-127 @50/60Hz, 2-15 @400Hz, +/- 5% for V>=1% Vnom
    Ithd: 0-100%, +/- 5% for V>=1% Inom,
    I Ind Harm: DC, [email protected]/60Hz, 2-15 @400Hz, +/- 5% for I>=1% Inom

    Misc.
    Pst – 10 minutes: 0.2-10, +/- 0.05 @ Pst=1 (50/60Hz only)
    Plt – 2 hours: 0.2-10, +/- 0.05 @ Pst=1 (50/60Hz only)

    Standards Compliance (50/60Hz systems only)

    Power Quality IEC 61000-4-30 Class A: Edition 2 (2008)
    IEEE 1159: 2009

    Power
    IEEE 1459: 2000

    Harmonics
    IEC 61000-4-7 Class 1: Edition 2 (2008)
    IEEE 519: 2014

    Voltage Flicker
    IEC 61000-4-15: Edition 2 (2010)
    IEEE 1453: 2011

    Compliance/Testing
    EN 50160: 2010

    General Specifications

    Dranetz HDPQ Xplorer 400

    • Size: (10″w x 8″h x 2.75″d), (25.4cm x 20.3cm x 7.0cm)
    • Weight: 4.2lbs, 2kg
    • Operating temperature: 0 to 50 deg C (32 to 122 deg F)
    • Storage temperature: -20 to 55 deg C (-4 to 131 deg F)
    • Humidity: 10-90% non condensing

    Dranetz HDPQ Xplorer 400 SP (IP65)

    • Size: (11″w x 6.5″h x 2.5″d), (27.9cm x 16.5cm x 6.4cm)
    • Weight: 3.8lbs, 1.72kg
    • Operating temperature: -10 to 50 deg C (14 to 122 deg F)
    • Storage temperature: -40 to 85 deg C (-40 to 185 deg F)
    • Humidity: 10-90% non condensing
    • Power Supply: 90-600VAC/500VDC (50/60Hz). Powered by the phase being measured, or other source

    Clock accuracy and resolution

    • Internal: +/- 1 sec/day at 25 deg C
    • NTP: +/-10 msec
    • GPS: +/-1 msec

    AC Adapter: 100-240Vac 50/60Hz
    Battery capacity and charge time:

    • Dranetz HDPQ Xplorer 400: 2.5 hours run time on full charge, 3 hours charge time
    • Dranetz HDPQ Xplorer 400 SP: 30 minutes run time on full charge, 3 hours charge time

    Memory size: 4GB
    Display: 7” WVGA color graphic, Icon based touch LCD, LED Backlit (Dranetz HDPQ Xplorer 400 only)
    Languages: English, German, Spanish, French, Italian, Swedish, Finnish, Polish, Chinese (traditional and simplified), Thai, Korean

    Communications

     Ethernet, 802.11 b/g/n Wireless (available without Wi-Fi as a special order)
    USB On the Go
    Bluetooth via USB adapter
    VNC remote control
    Android & Apple App

    Ease of Use Features

    Automatic Setups – Start monitoring in seconds!
    Pre-programmed monitoring modes – Pre-configured setups for various applications
    AnswerModules®– Sag/Dip directivity, PF Cap, Motor
    Dashboards – Power Quality, Demand & Energy – Immediately know when events have been recorded
    Simultaneous Power Quality, Demand & Energy monitoring
    Mini-Report – Take screen snapshots that can be uploaded to your computer and included in reports, attached to emails, etc.Power the instrument from the circuit being measured, or another source (SP Only)

     

    Click here for Brochure - Dranetz - HDPQ Xplorer 400

    02 9659 2300

    Quantity
{
  "moduleName": "overallcatalog",
  "name": "Dranetz Three-phase Portable Power Quality Analysers",
  "id": 312710,
  "description": "",
  "pagination": {
    "currentPage": 1,
    "itemsPerPage": 12,
    "numberOfPages": 0,
    "totalItemsCount": 0,
    "previousPageUrl": null,
    "nextPageUrl": null
  },
  "globals": {
    "get": {
      "CatalogueID": "312710",
      "ProductID": "10382229"
    },
    "cookie": {
      "visitorDeviceClass": "desktop",
      "ASP.NET_SessionId": "5jqiinc5js03cppsp3oaw2gq",
      "ANONID_FS2805306": "09.12.2019 07:06:39.858",
      "ANONID2805306": "a123a989-9b4a-4284-be1d-be5e4085f9b4",
      "VISID2805306": "62bfb969-09d2-40a9-b5ea-257ff1aa48e8#www.pacifictest.com.au#09.12.2019 07:06:39.858"
    },
    "site": {
      "id": 2805306,
      "name": "Pacific Test Equipment",
      "host": "www.pacifictest.com.au",
      "countryCode": "AU",
      "language": "EN",
      "dateNow": "2019-12-09T18:06:39.8736227"
    },
    "visitor": {
      "deviceClass": "desktop",
      "ip": "162.158.78.136",
      "country": "US",
      "city": "Ashburn",
      "userAgent": "CCBot/2.0 (https://commoncrawl.org/faq/)",
      "referrer": "/"
    },
    "cart": {
      "cartUrl": "/OrderRetrievev2.aspx?CatalogueID=312710"
    },
    "user": {
      "entityId": 0,
      "firstname": "",
      "middleName": "",
      "lastname": "",
      "fullname": "",
      "username": "",
      "email": "",
      "email2": "",
      "email3": "",
      "customerType": {},
      "leadSourceType": {},
      "industryType": {},
      "ratingType": {},
      "isWholesaler": false,
      "isLoggedIn": false
    }
  },
  "tag_productlist_5_7": {
    "moduleName": "tag_productlist_5",
    "moduleDescriptor": {
      "templatePath": "/Layouts/OnlineShop/large_product.html",
      "parameters": "3,,8,,true,true",
      "apiEndpoint": "/webresources/api/v3/sites/2805306/products",
      "objectType": -1,
      "objectId": 10382229,
      "adminUrl": ""
    },
    "editableFieldTypes": {
      "description": "Html",
      "id": "Id",
      "name": "Text",
      "url": "Text",
      "title": "Text",
      "smallImage": "Image",
      "largeImage": "Image",
      "releaseDate": "Date",
      "expiryDate": "Date",
      "productCode": "Text",
      "inStock": "Number",
      "onOrder": "Number",
      "reorder": "Number",
      "minUnits": "Number",
      "maxUnits": "Number",
      "unitType": "Text",
      "tags": "Text",
      "custom1": "Text",
      "custom2": "Text",
      "custom3": "Text",
      "custom4": "Text",
      "isOnSale": "Boolean",
      "retailPrice": "Number",
      "salePrice": "Number",
      "wholesalePrice": "Number",
      "metaTitle": "Text",
      "metaDescription": "Text"
    },
    "description": "
\n

Dranetz HDPQ® Xplorer 400 Portable and

\n

Dranetz HDPQ® Xplorer 400 SP (Rated IP65) Power Quality Analyzers

\n

Designed for Commercial, Military, Aviation, and Naval Industries with 400Hz Monitoring Capability! 

\n

Power from the Phase Feature; Power the Instrument from the Circuit Being Measured, or Another Source (SP Only)

\n
\n \"Dranetz \n
\n

Tests 50/60 and 400Hz

\n

High Speed Transient Capture

\n

Powered by the Phase Being Measured!
(SP Only)

\n

Advanced Remote Wireless Communications

\n

Made in the USA

\n
\n
\n \"Dranetz \n
\n

 

\n

The Dranetz HDPQ Xplorer 400 (portable) and Dranetz HDPQ Xplorer 400 SP (IP65) power quality analyzers take PQ, Demand and Energy monitoring to new\n heights by adding 400Hz monitoring capabilities to the already powerful Dranetz HDPQ Xplorer family. The Dranetz HDPQ Xplorer 400 is designed for\n applications such as aviation, naval, military, etc. requiring 400Hz capabilities that are not available in most PQ and Energy analyzers which\n typically only measure 50/60Hz. The Dranetz HDPQ Xplorer 400 family was designed with 400Hz applications in mind, but it is also an all-purpose\n tool that can be used for any traditional 50/60Hz application. In addition to the 400Hz applications, the Dranetz HDPQ Xplorer 400 family is perfect\n for applications such as power quality surveys, voltage and current transient studies, fault recording, inrush, motor testing, harmonic analysis,\n advanced distortion analysis, demand/energy/load studies, and many more.

\n

The Dranetz HDPQ Xplorer 400 and Dranetz HDPQ Xplorer 400 SP are the exact same instrument, but are in different enclosures. The Dranetz HDPQ Xplorer\n 400 is a true hand-held portable instrument with a built in 7″, tablet-like touch LCD display. The Dranetz HDPQ Xplorer 400 SP has the same measurement\n and communications capabilities, but is housed in an IP65 enclosure without an LCD display, and can also be powered by the circuit being measured.\n The IP65 enclosure of the Dranetz HDPQ Xplorer 400 SP greatly expands the applications of the Dranetz HDPQ Xplorer 400 into outdoor and harsh environments,\n along with other applications where an LCD display is undesirable.

\n

The Dranetz HDPQ Xplorer 400 family of power quality instruments offers you the best in class monitoring capabilities available. In addition to the\n 400Hz capabilities, it measures to all current industry standards, including IEC 61000-4-30 Class A, IEC 61000-4-7, IEEE 1159, IEEE 519, IEEE 1459,\n and more. With its high speed transient data capture (1 microsecond/channel) capabilities, this 8-channel workhorse simultaneously captures and\n characterizes thousands of parameters, by using a range of standard and customizable operating modes. The unique measurement capabilities include\n capture of low-medium-high frequency transients through peak, waveshape, rms duration and adaptive high-speed sampling, as well as power measurements\n to clearly characterize harmonics, non-sinusoidal, and unbalanced systems. The Intelligent AnswerModule® feature provides consultant-like analysis\n of sag directivity, capacitor switching transient identification/directivity and motor analysis/reporting.

\n

The Dranetz HDPQ Xplorer 400 family enables users to review data and change settings remotely from virtually any smartphone, tablet, mobile device,\n as well as with traditional PC and MAC laptops and desktops. Just hook up the instrument, close the cabinets to the ‘safe’ environment, and use\n either the VNC interface along with our Dran-View 7 software or our Dranetz HDPQ Apple or Android Apps via Ethernet for remote control from anywhere\n with connectivity to the instrument.

\n

Dranetz HDPQ Xplorer 400 Family – Precision

• High Definition PQ & Energy Monitoring – 1000Vrms, AC/DC, 512 samples/cycle \n
• High Speed Digitized Transients to 1us – 10 to 2000Vpk \n
• 50/60Hz and 400Hz operating modes \n
• Eight channels, 4 voltage & 4 current \n
• AnswerModules – Sag directivity, PF capacitor identification, motor – automatic event categorization \n
• Advanced PQ – IEC 61000-4-30 Class A & IEEE 1159 compliant \n
• Harmonics – IEC 61000-4-7, IEEE 519 (2014) \n
• Transient capabilities – V & I – waveshape triggers, high speed. Well beyond standards requirements \n
• IEEE 1459 Advanced Power Measurements \n
• 10,000 cycle pre/post trigger buffer \n
• EN 50160 Ed 3 \n

Dranetz HDPQ Xplorer 400 Family – Communications

• Ethernet, Wi-Fi, USB, Bluetooth \n
• VNC for full remote control from Dran-View 7 or a 3rd party App \n
• Apple & Android apps with real time metering and alarm Dashboard \n

Dranetz HDPQ Xplorer 400 Family – Safe & Rugged

• Arc Flash Safety \n
• UL/cUL listed and CE approved \n
• Rugged enclosure with an easy to grip, shock absorbing, non-conductive boot (Dranetz HDPQ Xplorer 400 only) \n
• IP65 enclosure for harsh and outdoor environments (Dranetz HDPQ Xplorer 400 SP only) \n
• Drop tested to 6’ (Dranetz HDPQ Xplorer 400 only) \n
• Power supply cable retainer (Dranetz HDPQ Xplorer 400 only) \n
• Wire management in easel and hook (Dranetz HDPQ Xplorer 400 only) \n
• Automatic circuit detection and feedback on proper connection of the instrument User Interface \n

Dranetz HDPQ Xplorer 400 Family – User Interface

• 7” WVGA color touch display (Dranetz HDPQ Xplorer 400 only) \n
• Automatic setups – PQ, Demand and Energy \n
• Tablet-like GUI that is icon driven, has taskbar shortcuts, and a Dashboard (only available remotely on the Dranetz HDPQ Xplorer 400 SP) \n

Dranetz HDPQ Xplorer 400 Family – Productivity

• Mini-report – Screen snapshots, XML file. Easily uploaded and emailed! \n
• PQ & energy Dashboard’s for real time alarming \n
• Bigger display for more productive local analysis (Dranetz HDPQ Xplorer 400 only) \n
• AnswerModules – automatic event categorization \n
Dran-View 7 power quality analysis software \n
• Rescue kit – Part of Dran-View 7. Correct problems with wiring, CT orientation, time errors and more \n
• Post processing – Part of Dran-View 7. Compute harmonics and other parameters from the waveforms recorded by the instrument \n
\n

 

\n

Measured Parameters

\n

(4) Differential Voltage: 512 s/c, 16 bit resolution

\n
    \n
  • 0-1000Vrms, AC/DC, +/- 0.1% reading +/- 0.05% FS
  • \n
  • IEC 61000-4-30 Class A: 60-1000Vrms, ±0.1 % of Udin, range of 10% – 150% of Udin
  • \n
  • Transients – rms: 0-1414Vpk, ±0.2 % of Udin
  • \n
  • Transients – High Speed: 10-2000Vpk, +/- 10% of reading, +/- 0.5% FS
  • \n
\n

(4) Current: 512 s/c, 16 bit resolution

\n
    \n
  • Range (rms) probe dependent, AC/DC, +/- 0.1% reading +/- 0.05% FS
  • \n
  • Transients – Range probe dependent
  • \n
  • Transients – High Speed: Range probe dependent., 10% of Reading, +/- 0.5% FS
  • \n
\n

Frequency: 10 sec window

\n
    \n
  • 42.5-69Hz, +/- 0.01Hz, 380-420Hz +/- 0.1Hz
  • \n
\n

Calculated Parameters

\n

Power/Energy – 1 Second sampling\n
Real Power (W) – P: meets 0.2S requirements, range probe dependent\n
Apparent Power (VA) – S: meets 0.2S requirements, range probe dependent\n
Reactive Power (var) – Q: meets 0.2S requirements, range probe dependent\n
Power Factor (W/VA) -”true” -1 to 0 to +1\n
Displacement PF 1 to 0 to 1\n
Demand (in W): meets 0.2S requirements, range probe dependent\n
Energy (in Wh): meets 0.2S requirements, range probe dependent

\n

Distortion – 200ms, 3 sec, 10 min windows\n
Vthd: 0-100%, +/- 5% for V>=1% Vnom,\n
V Ind Harm: DC, 2-127 @50/60Hz, 2-15 @400Hz, +/- 5% for V>=1% Vnom\n
Ithd: 0-100%, +/- 5% for V>=1% Inom,\n
I Ind Harm: DC, [email protected]/60Hz, 2-15 @400Hz, +/- 5% for I>=1% Inom

\n

Misc.\n
Pst – 10 minutes: 0.2-10, +/- 0.05 @ Pst=1 (50/60Hz only)\n
Plt – 2 hours: 0.2-10, +/- 0.05 @ Pst=1 (50/60Hz only)

\n

Standards Compliance (50/60Hz systems only)

\n

Power Quality IEC 61000-4-30 Class A: Edition 2 (2008)\n
IEEE 1159: 2009

\n

Power\n
IEEE 1459: 2000

\n

Harmonics\n
IEC 61000-4-7 Class 1: Edition 2 (2008)\n
IEEE 519: 2014

\n

Voltage Flicker\n
IEC 61000-4-15: Edition 2 (2010)\n
IEEE 1453: 2011

\n

Compliance/Testing\n
EN 50160: 2010

\n

General Specifications\n

\n

Dranetz HDPQ Xplorer 400\n

\n
    \n
  • Size: (10″w x 8″h x 2.75″d), (25.4cm x 20.3cm x 7.0cm)
  • \n
  • Weight: 4.2lbs, 2kg
  • \n
  • Operating temperature: 0 to 50 deg C (32 to 122 deg F)
  • \n
  • Storage temperature: -20 to 55 deg C (-4 to 131 deg F)
  • \n
  • Humidity: 10-90% non condensing
  • \n
\n

Dranetz HDPQ Xplorer 400 SP (IP65)\n

\n
    \n
  • Size: (11″w x 6.5″h x 2.5″d), (27.9cm x 16.5cm x 6.4cm)
  • \n
  • Weight: 3.8lbs, 1.72kg
  • \n
  • Operating temperature: -10 to 50 deg C (14 to 122 deg F)
  • \n
  • Storage temperature: -40 to 85 deg C (-40 to 185 deg F)
  • \n
  • Humidity: 10-90% non condensing
  • \n
  • Power Supply: 90-600VAC/500VDC (50/60Hz). Powered by the phase being measured, or other source
  • \n
\n

Clock accuracy and resolution\n

\n
    \n
  • Internal: +/- 1 sec/day at 25 deg C
  • \n
  • NTP: +/-10 msec
  • \n
  • GPS: +/-1 msec
  • \n
\n

AC Adapter: 100-240Vac 50/60Hz
Battery capacity and charge time:
\n

\n
    \n
  • Dranetz HDPQ Xplorer 400: 2.5 hours run time on full charge, 3 hours charge time
  • \n
  • Dranetz HDPQ Xplorer 400 SP: 30 minutes run time on full charge, 3 hours charge time
  • \n
\n

Memory size: 4GB\n
Display: 7” WVGA color graphic, Icon based touch LCD, LED Backlit (Dranetz HDPQ Xplorer 400 only)\n
Languages: English, German, Spanish, French, Italian, Swedish, Finnish, Polish, Chinese (traditional and simplified), Thai, Korean

\n

Communications

\n

 Ethernet, 802.11 b/g/n Wireless (available without Wi-Fi as a special order)
USB On the Go
Bluetooth via USB adapter
VNC remote control
Android & Apple App

\n

Ease of Use Features\n \n

\n

Automatic Setups – Start monitoring in seconds!\n
Pre-programmed monitoring modes – Pre-configured setups for various applications\n
AnswerModules®– Sag/Dip directivity, PF Cap, Motor\n
Dashboards – Power Quality, Demand & Energy – Immediately know when events have been recorded\n
Simultaneous Power Quality, Demand & Energy monitoring\n
Mini-Report – Take screen snapshots that can be uploaded to your computer and included in reports, attached to emails, etc.Power the instrument from the circuit being measured, or another source (SP Only)

\n

 

\n
Click here for Brochure - Dranetz - HDPQ Xplorer 400\n
", "catalogId": 312710, "id": 10382229, "name": "Dranetz - HDPQ Xplorer 400, 400Hz monitoring, High Speed Transients, 10,000 trigger cycles, AnswerModules, Sag/Dip, Swell Transient, Harmonics", "url": "/Products/power-analysers/portable-battery-powered/Three-Phase/dranetz-three-phase-portable-power-quality-analysers/dranetz-hdpq-xplorer-400", "title": "", "smallImage": "/_assets/images/product/HDPQ_Xplorer.png", "smallImageUrl": "/_assets/images/product/HDPQ_Xplorer.png", "largeImage": "/_assets/images/product/HDPQ_Xplorer.png", "largeImageUrl": "/_assets/images/product/HDPQ_Xplorer.png", "releaseDate": "2016-10-04T00:00:00", "releaseDate_raw": "2016-10-03T23:00:00", "expiryDate": "9999-01-01T00:00:00", "expiryDate_raw": "9999-01-01T00:00:00", "productCode": "HDPQ Xplorer 400", "inStock": null, "onOrder": 0, "reorder": null, "minUnits": null, "maxUnits": null, "unitType": "", "tags": "", "custom1": "", "custom2": "", "custom3": "", "custom4": "", "isOnSale": false, "countryCode": "AU", "currencyFormat": "$", "countryCurrencyFormat": "AUD", "retailPrice": null, "salePrice": null, "wholesalePrice": null, "discountPrice": null, "totalDiscountPrice": null, "totalPrice": null, "tax": null, "taxCode": null, "taxRate": null, "metaTitle": "", "metaDescription": "", "urlWithHost": "http://www.pacifictest.com.au/Products/power-analysers/portable-battery-powered/Three-Phase/dranetz-three-phase-portable-power-quality-analysers/dranetz-hdpq-xplorer-400", "myPoplets": { "moduleName": "data", "moduleDescriptor": { "templatePath": null, "parameters": "version=\"v3\",resource=\"products\",resourceid=\"10382229\",fields=\"poplets\",collection=\"myPoplets\",template=\"\"", "apiEndpoint": "/api/v3/data", "objectType": -1, "objectId": -1, "adminUrl": "" }, "poplets": "", "params": { "version": "v3", "resource": "products", "resourceid": "10382229", "fields": "poplets", "collection": "myPoplets", "template": "" } }, "tag_addtofavorites_6_8": { "moduleName": "tag_addtofavorites_6", "moduleDescriptor": { "templatePath": null, "parameters": "Add to Wishlist,Remove from Wishlist", "apiEndpoint": "/api/v3/tag_addtofavorites_6", "objectType": -1, "objectId": -1, "adminUrl": "" }, "isFavorite": false, "addUrl": "/FavoriteProcess.aspx?OID=10382229&OTYPE=27", "addText": "Add to Wishlist", "removeUrl": "/FavoriteProcess.aspx?A=Remove&OID=10382229&OTYPE=27", "removeText": "Remove from Wishlist", "full": "Add to Wishlist" }, "relatedProducts": { "moduleName": "tag_relatedproducts_8", "moduleDescriptor": { "templatePath": "/Layouts/OnlineShop/small_product.html", "parameters": ",template=\"\",collection=\"relatedProducts\"", "apiEndpoint": "/api/v3/tag_relatedproducts_8", "objectType": -1, "objectId": -1, "adminUrl": "" } } } }
No items found.