High frequency, high current testing of very low impedance loads
\n
LPA05A & LPA05B laboratory power amplifiers provide wide bandwidth signal amplification at up to 8A peak, extending the range of industrial and\n laboratory applications into which the LPA series can be used.
\n
Designed originally for use with the PSM range frequency respsonse analyzers,\n the LPA05 laboratory power amplifier can also be used anywhere where there is a need to boost a signal either in voltage or current up to 1MHz.
\n
They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive or resistive.
\n
Optionally, the DC component can be eliminated with AC coupling, or can be reduced with AC+(DC) coupling. To limit high frequency noise, the input\n bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low frequency applications. A common application for the laboratory\n power amplifiers is in situations where is a requirement for impedance measurement of a device under high voltage bias or high current bias conditions,\n in these applications the combination of a PSM1700, PSM1735 or PSM3750 + LPA Laboratory Power Amplifier + HF Current Shunt\n form a high power impedance measurement system.
\n
\n
\n
For high frequency, high current testing of very low impedence loads\n
\n
DC and AC selectable and wide bandwidth\n
\n
Switch selectable coupling options (AC, AC+DC or AC with reduced DC)\n
\n
Max AC output current is 3A rms\n
\n
Max DC output current is 2A\n
\n
High slew rate\n
\n
Fixed 10x gain\n
\n
Isolated from ground\n
\n
Robust metal enclosure\n
\n
\n
\n
\n \n
\n
16 or 20Vpk @ 5 or 3Apk from DC to 1MHz
\n
High frequency and current into low impedance
\n
\n
\n
Fixed x10 gain
\n
Stable into any load
\n
\n
\n
High slew rate
\n
Isolated BNC or 4mm touchproof output sockets
\n
\n
\n
Ideal for Impedance analysis at high current bias
\n
Combine with a PSM + HF Shunt for Impedance analysis
LPA05A & LPA05B laboratory power amplifiers provide wide bandwidth signal amplification at up to 8A peak, extending the range of industrial and\n laboratory applications into which the LPA series can be used.
\n
Designed originally for use with the PSM range frequency respsonse analyzers,\n the LPA05 laboratory power amplifier can also be used anywhere where there is a need to boost a signal either in voltage or current up to 1MHz.
\n
They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive or resistive.
\n
Optionally, the DC component can be eliminated with AC coupling, or can be reduced with AC+(DC) coupling. To limit high frequency noise, the input\n bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low frequency applications. A common application for the laboratory\n power amplifiers is in situations where is a requirement for impedance measurement of a device under high voltage bias or high current bias conditions,\n in these applications the combination of a PSM1700, PSM1735 or PSM3750 + LPA Laboratory Power Amplifier + HF Current Shunt\n form a high power impedance measurement system.
\n
\n
\n
For high frequency, high current testing of very low impedance loads\n
\n
DC and AC selectable and wide bandwidth\n
\n
Switch selectable coupling options (AC, AC+DC or AC with reduced DC)\n
\n
Max AC output current is 5A rms\n
\n
Max DC output current is 4A\n
\n
High slew rate\n
\n
Fixed 10x gain\n
\n
Isolated from ground\n
\n
Robust metal enclosure\n
\n
\n
\n
\n \n
\n
16 or 20Vpk @ 5 or 3Apk from DC to 1MHz
\n
High frequency and current into low impedance
\n
\n
\n
Fixed x10 gain
\n
Stable into any load
\n
\n
\n
High slew rate
\n
Isolated BNC or 4mm touchproof output sockets
\n
\n
\n
Ideal for Impedance analysis at high current bias
\n
Combine with a PSM + HF Shunt for Impedance analysis
High frequency, high current testing of very low impedance loads
\n
LPA05A & LPA05B laboratory power amplifiers provide wide bandwidth signal amplification at up to 8A peak, extending the range of industrial and\n laboratory applications into which the LPA series can be used.
\n
Designed originally for use with the PSM range frequency respsonse analyzers,\n the LPA05 laboratory power amplifier can also be used anywhere where there is a need to boost a signal either in voltage or current up to 1MHz.
\n
They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive or resistive.
\n
Optionally, the DC component can be eliminated with AC coupling, or can be reduced with AC+(DC) coupling. To limit high frequency noise, the input\n bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low frequency applications. A common application for the laboratory\n power amplifiers is in situations where is a requirement for impedance measurement of a device under high voltage bias or high current bias conditions,\n in these applications the combination of a PSM1700, PSM1735 or PSM3750 + LPA Laboratory Power Amplifier + HF Current Shunt\n form a high power impedance measurement system.
\n
\n
\n
For high frequency, high current testing of very low impedence loads\n
\n
DC and AC selectable and wide bandwidth\n
\n
Switch selectable coupling options (AC, AC+DC or AC with reduced DC)\n
\n
Max AC output current is 3A rms\n
\n
Max DC output current is 2A\n
\n
High slew rate\n
\n
Fixed 10x gain\n
\n
Isolated from ground\n
\n
Robust metal enclosure\n
\n
\n
\n
\n \n
\n
16 or 20Vpk @ 5 or 3Apk from DC to 1MHz
\n
High frequency and current into low impedance
\n
\n
\n
Fixed x10 gain
\n
Stable into any load
\n
\n
\n
High slew rate
\n
Isolated BNC or 4mm touchproof output sockets
\n
\n
\n
Ideal for Impedance analysis at high current bias
\n
Combine with a PSM + HF Shunt for Impedance analysis
LPA05A & LPA05B laboratory power amplifiers provide wide bandwidth signal amplification at up to 8A peak, extending the range of industrial and\n laboratory applications into which the LPA series can be used.
\n
Designed originally for use with the PSM range frequency respsonse analyzers,\n the LPA05 laboratory power amplifier can also be used anywhere where there is a need to boost a signal either in voltage or current up to 1MHz.
\n
They combine DC accuracy with wide bandwidth to faithfully reproduce complex waveforms, driving loads that may be capacitive, inductive or resistive.
\n
Optionally, the DC component can be eliminated with AC coupling, or can be reduced with AC+(DC) coupling. To limit high frequency noise, the input\n bandwidth can be reduced with a linear phase, 2nd order, low pass filter for low frequency applications. A common application for the laboratory\n power amplifiers is in situations where is a requirement for impedance measurement of a device under high voltage bias or high current bias conditions,\n in these applications the combination of a PSM1700, PSM1735 or PSM3750 + LPA Laboratory Power Amplifier + HF Current Shunt\n form a high power impedance measurement system.
\n
\n
\n
For high frequency, high current testing of very low impedance loads\n
\n
DC and AC selectable and wide bandwidth\n
\n
Switch selectable coupling options (AC, AC+DC or AC with reduced DC)\n
\n
Max AC output current is 5A rms\n
\n
Max DC output current is 4A\n
\n
High slew rate\n
\n
Fixed 10x gain\n
\n
Isolated from ground\n
\n
Robust metal enclosure\n
\n
\n
\n
\n \n
\n
16 or 20Vpk @ 5 or 3Apk from DC to 1MHz
\n
High frequency and current into low impedance
\n
\n
\n
Fixed x10 gain
\n
Stable into any load
\n
\n
\n
High slew rate
\n
Isolated BNC or 4mm touchproof output sockets
\n
\n
\n
Ideal for Impedance analysis at high current bias
\n
Combine with a PSM + HF Shunt for Impedance analysis
